MIG welders are remarkable machines. They are on-the-go equipment for beginners to start their welding career, and at the same time, professional welders use MIG machines for heavy-duty tasks. As the title suggests, this post specifically lists the best 220V MIG welder for the money.
Generally, 220V MIG welders are heavy-duty machines with higher amperage, impressive duty cycle, wire speed, and the ability to weld thicker metals. Some of them also come with a spool gun to weld aluminum – or at least have the feature to attach your spool gun.
The Best Choice : Hobart 210 MVP
Hobart Handler 210 MVP is one of its kind with the ability to run on 210 Amperes in a portable case. This beast supports both MIG and flux-core welding and can weld up to 3/8” thick mild steel.
Its duty cycle is 30%@150 Amperes, the amperage is 25-210 Amps, and wire-speed is 40-770 IPM. Hobart 210 is a dual-voltage machine and can be operated on 115V or 230V. Certainly the best 220V MIG welder around.
So, here is the list of the best 220 volt MIG welders to buy in 2021:
Comparison Table: 220 MIG Welders
|Hobart Handler 210 MVP||Check Price|
|Lotos MIG 175 Welder||Check Price|
|Lincoln Electric Powermig 210 MP||Check Price|
|Hobart Ironman 230 With Spool Gun||Check Price|
|Hobart Handler 190 With Spoolrunner||Check Price|
|Weldpro 200 AMP Multiprocess Welder||Check Price|
|SUNGOLDPOWER 110V/220V MIG Welder||Check Price|
Top 7 220v MIG Welder Reviews
1. Hobart Handler 210 MVP
Input Power: 115/230 V
Duty Cycle: 20% at 90 amperes
Weight: 79 lbs.
Amperage: 25-210 amperes on230 V; 25-140 amperes on115V
Hobart Handler 210 MVP– a highly versatile welder for a professional welder like you. It ensures that the user has achieved high-quality yet neat welds. The state-of-the-art welder by the pioneers of the welding industry comes with attractive seven voltage positions.
The controls of Hobart Handler 220 MVP are quite simple. To start with, there are 3 switches or controls in total; an amperage switch, a voltage switch, and an ON/OFF switch. Moreover, the three knobs are user-friendly. Therefore, you can change the amperage and voltage without taking off your protective gloves.
Most expensive welders don’t have 220V outlets. However, the piece we are talking about is compatible with both, 220 V outlets and standard 120 V outlets. Both the plugs are attached to the power cable. The 220 MVP handler adjusts itself to the power source you are using.
If you connect the welder to 120 V, the 210 Hobart Handler welder can use a maximum amperage of 140 amperes. It can weld 1/8th inch of steel in a single pass. If the welding power is not enough, you can attach the power cable to a 220 V outlet.
Aluminum Drive System
The aluminum drive systems have a reputation for wearing out quickly in most MIG welders. However, Hobart 210 is one of the machines with the best drive systems.
It ensures unmatched durability because the drive system feeds constant wire to the spool gun from the machine during the welding process. The robust functionality prevents a series of problems we find in other MIG welders.
Seven Voltage Positions
Enhanced magnetics with infinite wire feed speed control offers great arc performance with improved control over the machine. The cleanup requirement reduces as the machine produces less spatter for enhanced bead appearance.
Built-In Spool Gun
Built-in spool runner to plug in the gun directly. This feature eliminates all the feeding issues with soft aluminum wires.
The Hobart Handler 210 MVP comes with seven voltage positions, which make it ideal for professional welders.
2. LOTOS MIG 175 175 MP MIG Welder
If you have a job to weld aluminum, stainless steel, or steel on a consistent basis, LOTOS MIG 175 175 MP welder comes with everything you might need. The quick setup, a solid torch, and a consistent flow rate are all the features you desperately need to weld aluminum.
The standard size of reels alongside two-spool guns (4- and 6-inch guns) ensures that the setup and process time is not more than 10 minutes.
The heavy-duty machine’s power system is designed with in-built auto short circuit protection. This feature increases the performance of the two circuits integrated inside the feeder motor.
DC Made ARC Technology
A promising yet strong DC Arc technology ensures that your welding job becomes as seamless and easy as possible. The machine has the ‘DC made arc’ feature which is not present in traditional MIG welders. Strong arc technology is essential in keeping the arc flow consistent.
Built-In Spool Gun Space
The welder is spool gun-ready and provides argon gas and flux core wire to perform MIG wire feeding. The adjustable wire with flux core and argon has made a great combination and derives good results.
It helps to weld aluminum while adjusting the wire feed. Speaking of welding, the spool gun that comes with the machine can weld 4 to 6 inches of aluminum and other kinds of metals.
Infinite Voltage Settings
The welder operates on dual-frequency: 50 to 60 Hz. The Infinite voltage control gives full autonomy to the welder. Moreover, this feature comes in handy while using infinite voltage power.
Thermal Overload Protection
The smart temperature control in the overload protection keeps your welder cool and safe from hot wires.
The two trigger option releases gas before the arc DC in order to weld; the welder only needs a 3-second break to give output weld result.
Related: LOTOS MIG175 Complete Review
3. Lincoln PowerMIG 210 MP
Input Power: 115/220V
Duty Cycle: 25% @ 200 amperes; 40% @ 100 amperes
Weight: 40 lbs.
Amperage: 20-140 amperes on 115 V; 20-220 on 230 V
The 210 PowerMIG welder has definitely caused a stir in the welding industry, thanks to its applaudable and alluring qualities. It performs a plethora of welding operations, including MIG welding, FCAW, Stick, and TIG welding.
PowerMIG is carefully designed for small contractors, novice welders, and apprentices who prefer MIG welding but also want their hands clean on other types of welding; that is, stick and TIG.
The all-rounder’s impeccability and versatility have driven up the performance charts despite a few disparities in the features.
Lincoln PowerMIG features dual-voltage input so that the welder can use it on standard 115 V outlets as well as outlets sourcing 220 V. The dual-voltage input facilitates working anywhere. All you have to do is attach it to the power source and get an adequate supply for welding jobs.
The large digital screen and simple controls embedded at front of the welder make the process uncomplicated, easy, and hassle-free. The controls are user-friendly and come with a large color display.
The push-and-turn buttons guide you through the machine’s settings- you can adjust the voltage and amperage to make the operation easier for your welding job. However, you would need the practice to adjust the advanced controls on the welder.
The 210 amp-powered machine ensures that it performs and handles every welding task as smoothly as possible. For instance, it can weld 5/16 inches in stainless steel and mild steel. Likewise, it can weld up to 3/16 inches for aluminum.
The spool gun-ready outlet is used to ensure effectiveness and preciseness while welding aluminum.
Works with Gas-Shielded And Self-Shielded Wire Types
The PowerMIG welder features a flux-core that works with both types of wire; gas-shielded and self-shielded. The DC stick in the welder handles up to 5/32 in electrodes alongside the ground clamp, regulator, storage kit, and spool gun.
Moreover, the DC TIG runs on touch start technology to save time for the welder.
Lincoln PowerMIG 210 MP is a multi-process welder and extremely easy to use for TIG welding, stick welding, flux-core, and MIG welding.
4. Hobart Ironman 230 with Spool Gun
Hobart created Ironman to give exceptional welding results as compared to its predecessors and competitors. Although it is manufactured for lightweight welding jobs, it showcases durability and versatility as a shielded flux-core and MIG welder.
It is specifically designed to weld mild materials with a thickness of ½ inch in a single pass. The Ironman has beaten its predecessors in terms of duty cycle, voltage control, amperage control, arc quality, and value for money.
System Set Up Is Easy
The Ironman 230 by Hobart comes job-ready. Everything you need to start the process right away is included in the package. Moreover, the comprehensive manual will navigate you through the process. The chart attached on the inside door of the welder is used to select specific settings for better arc control and to adjust amperage and voltage.
12 Voltage Position Settings
The 12 tap voltage settings give maximum control and precision to the user. In fact, the welder has a reputation for easy adjustability of voltage. All you have to do is fine-tune the settings in accordance with the type of welding job.
The voltage adjustment settings are pretty simple to start with and account for smooth control and better arc quality.
Moreover, the infinite wire feed speed ranges from 0 to 700 IPM. You get less spatter, deep weld penetration, and enhances bead shape with a range as high as this. You can adjust the wire feed speed and other parameters (such as voltage) based on the wire diameter and the thickness of the metal.
The built-in thermal contactor protects the feeder motor by shutting down the system automatically due to overheating. The fan-on-demand feature is activated manually and is used to draw low power load while cleaning dust and air-borne particles from entering the machine’s circuitry.
Reversible Drive Roll And Dual-Groove System
The polarity changeover and spare part-time are greatly reduced because of the reversible drive roll system. Moreover, the dual-groove system allows you to use two different sizes of wire.
The Hobart Ironmen 230 has 12 different voltage settings to weld the thickness of 24-gauge sheet metal alongside infinite wire feed speed control
5. Hobart Handler 190 With Spool Runner
Hobart Handler 190 is similar to other low-priced MIG welders with great capabilities to weld aluminum as well as steel. The versatile welder has robust capabilities, loads of packing power, and a user-friendly interface for novice welders.
Impressive Welding Capabilities
Despite the impressive amperage of 190 amperes, it is only appropriate for non-industrial and non-commercial welding jobs. You can tackle all light to medium welding tasks that can weld up to 24-gauge materials with a thickness of not more than 5/6 inches. The welding and penetration power make it appropriate for maintenance, construction, and automotive work.
The welder does not hold back in terms of compatibility. It works on a generator, so, you can tag it along at any location and use it regardless of no power outlet in the vicinity.
Minimalistic Display Design
The minimalistic design allows novice welders to test and advance their skills. The front panel has a trigger lead connectivity button, 7 voltage positions, a control switch, and a knob to adjust infinite wire feed speed.
Dual-Groove Roll Mechanism
The dual-groove roll system allows the user to switch to different sizes of wires among gas-shielded and flux-cored wires. The Hobart 190 welder features a quick drive roll system with 3 different types of grooves.
Built-In Cold Contactor
The enhancing contactor keeps the electrical wires cold when the welder is not in operation. Whenever the trigger is pulled, the built-in contactor cuts off and makes the wire electrically hot and conducting.
It is an impressive feature for first-timers as it reduces the risks of sustaining first-time welding injuries.
Automatic Short Circuit Protection
The automatic short circuit protection feature prevents the overloading of electric current.
Self-Resetting Protection System
The new feature in the Hobart welding series self-resetting protection system prevents thermal overload in the machine.
Motor Protection Feature
The motor protection feature protects the feeder motor and limits the wire feed overload during the welding process.
You can handle mild steel, stainless steel, flux-core steel, and aluminum with Hobart Handler 190 welder. The machine comes with a unique 100 SpoolRunner gun to prevent the wire feeding issues that arise when welding aluminum.
Pre-Built Circuitry System
Hobart Handler 190 features a pre-built circuitry system that eliminates all the necessities of extra controls and kits. The selector switch allows you to switch from spool gun to MIG and vice versa with great ease. All you have to do is plug in the device and start working on your job.
The 7 voltage positions, a control switch and a knob to adjust the infinite wire feed speed allow better control; the voltage settings are attached to trigger lead connectivity button for good welds.
7. Weldpro 200 AMP Multiprocess Welder
The multi-process welder by Weldpro allows you to perform all types of welding; stick, TIG, MIG, and flux-core welding. It allows greatly for beginner’s practice and to prepare for upcoming certification exams as the welder can tackle any kind of non-industrial welding job.
Unlike other stick/TIG welders, the fine adjustments speak for its price. The construction is quite impressive as you can store, handle and carry it with ease. The Weldpro welder is capable of handling aluminum and stick welding, all thanks to the spool gun.
Beginner-Friendly Set Up
Weldpro 200 is considered a beginner-friendly welder with a futuristic yet minimalistic setup system. The controls at the front panel of the welder are quite intuitive. You can switch from one process to another with a single button.
Large Digital Display
The bright yet large digital display makes it easy for novice as well as professional welders to read the voltage and wire feed speed settings even in the low-light areas.
You can make use of the large display to read the wire feed speed and amperage settings, even in bright lighting conditions.
The nice touch allows you to tune the settings with style. The menu includes an option where you can adjust the voltage by -/+20% directly.
The display of Weldpro 200 also allows you to VRD high temperature. However, you don’t have to worry about it as the overload protection keeps it in check and turns off the machine to prevent damage to the internal circuitry.
The inductance settings on the display board are adjustable by -/+ 10% as well. Generally, the Weldpro consists of options that allow you to customize your settings as per the nature of the welding job.
The synergistic design allows you to adjust wire feed speed and voltage using a simple dial; Weldpro 200 is capable of TIG, MIG, stick, and flux-core welding.
7. SUNGOLDPOWER 110/220 MIG welder
This 140 A welder by SUNGOLDPOWER is based on IGBT inverter technology- it is capable of doing both, gas-shielded MIG welding and self-shielded flux-core welding. The brand it is associated with is not on top of the list but the welder is quite remarkable to carry out various household welding jobs.
The package includes flux-core wire as well as solid-core wire to incorporate flux-core and MIG welding processes.
The dual-voltage mechanism with an impressive duty cycle maximizes the welding performance as well as the quality of the welds. That is why, it is exceptionally ideal for welding rusted metal, heavy-duty equipment, construction work, maintenance, outdoor repairs, etc.
The front panel of the 140 A welder includes adjustable dials for selecting desirable welding current (amperage) alongside wire feed speed. The infinite voltage settings provide accurate adjustments to work on any kind of metal. Therefore, it is an impressive model for traditional MIG welding as well as gasless flux-core welding.
IGBT Inverter Technology
The SUNGOLDPOWER 140 A is equipped with IGBT inverter technology. It means that it consists of a high-speed switching device that allows you to change between gasless and gas-shielded MIG welding.
The technology is still new in the market. However, SUNGOLDPOWER continues to incorporate it in its welding machines. It removes all the guesswork and provides accuracy to the user.
Wire Spool Compatibility
Besides the power output current, dual-voltage mechanism, and IGBT inverter technology, the wire spool compatibility is up to the mark as you can use 2 lbs. or 10 lbs. wire spools.
The MIG welding option in the 140 A welder is quite impressive- you can weld numerous materials such as stainless steel, mild steel, etc.
Custom Wire Feed Circulation System
The in-built wire feed circulation feature readjusts the welding amperage as well as the wire feeding movement. You can adjust the wire feed speed as per your preference.
SUNGOLDPOWER 140 A welder features an advanced module of IGBT inverter technology with a dual-voltage system; the anti-sticking system prevents overheating and overloading simultaneously.
Frequently Asked Questions – FAQ
In a nutshell, 220V MIG welders are probably the most powerful welding equipment on the market. You can weld up to 1/2″ inches with the right welder.
Moreover, most 220 volts MIG welders are able to weld aluminum too – or at least have the option to attach a spool gun. Thus, if you’re looking for a long-term welding solution, I recommended choosing 220V over 110V MIG welders.
Hobart Handler 210 MVP is the expert’s choice on this list. The runner-up is the LOTOS MIG175 and Hobart Ironman 230. All these 220 MIG machines are best in their own way. A welder on this list that works best for me may not serve the same deal to your welding needs.
So, read carefully, analyze their key features, pros, and cons, and then decide for yourself – whether you want the top of line, Hobart 210 MVP or SUNGOLDPOWER 220 MIG.
Learn more about MIG welding at Weldingrage.com
Jaxon is an integral part of Welding Rage team. He’s a writer and working closely to the welding industry for years. Jaxon is helping us shortlisting the best MIG welders on the market with his welder friends.